New stamps and dies - What do I do now?

Untitled design.png

I often think that sometimes I have a number of hobbies, buying stamps, using my stamps and cleaning/organising my craft room. I am really good at buying stamps, not so good at utilising my stamp collection or organising my room.

I have to admit, that I lack confidence sometimes in what to create. Sometimes I can take up the limited time in my craft room pondering what to create. To overcome my block, I prepare my stamps and dies to show how they stamp and the look of the dies. I look at the combinations of the stamped messages and write out some of the options. For Words of Cheer, I considered just buying the dies, but the sentiments are gorgeous and can be used for inside and outside sentiments

I also look at the catalogue for ideas from the concept artist. As a demonstrator I can access the information which shows what items have been used to create each card and also the basic techniques, this helps as a starting point (you can use the pictures or contact me directly if you have any questions about catalogue samples.) I then tend to create a board on Pinterest to Pin the items that I find using the stamps and dies I am playing with. I am conscious that not all examples and images can be seen on Pinterest so I also tend to do a Google search and look at the images ( I must confess sometimes you get some random images so be careful what you put in the search box!) These images can be saved to Pinterest or can be saved for future reference, I tend to try and Pin them to Pinterest as that is where I tend to look for inspiration. Of course, there is also Facebook and Instagram as well, also its does not have to be the stamp and die set you are using which inspires you, it doesn’t even need to be Stampin’ Up! I tend to pin anything which inspires me .

Pining keeps me quiet when I someone has stolen all my spoons. I love searching for inspiration, I just have to ensure that I remember to craft too. What do you use to find inspiration and to start creating with your new stamps and dies?

post-signature.png

Batch Making Simple Christmas Tags

My last video showed how to make some simple tag topper tags to match some tissue paper which I have in my craft room. Todays video shows how I batch make tags, either to sell at craft fairs or to use on presents .

At Christmas I use so many tags and my family and friends need tags too. This often means that I need multiples to match my wrapping paper (or I buy wrapping paper to match my pre-made tags.) I find the easiest way to create lots of tags is to batch make them. If I make them one at a time it takes about 5 minutes. I created 12 in about 40 minutes by completing the tasks together.

gold silver.jpg

Actions

  1. Decide on a design

  2. Collect all the supplies needed to create the tags - stamps, blocks, ink, Versamark, embossing powder, heat tool and ribbons/ embellishments.

  3. Find or work out the dimensions needed for the tags

    Metric

    Shaded Spruce/ Night of Navy and Basic White - 5cm x 10.5cm

    Imperial

    Shaded Spruce/ Night of Navy and Basic White - Just under 2 inches x 4 inches

  4. Cut all the tags (including the white for reverse)

  5. Punch out all the strips using the tag topper punches

  6. Using the Embossing Buddy or any anti-static tool (this prevents Embossing powder from sticking to places you dont want it.

  7. Use Versamark to stamp the greeting

  8. Add embossing powder ( tap or blow off the excess, you can also use a brush to remove the excess.)

  9. Use heat tool to set/melt embossing powder

  10. Leave tags to cool

  11. Identify a white tag or backing for each tag (may need to trim off excess)

  12. Stamp the to and from in chosen ink colour

  13. Add glue to stick the tags together (trim off excess)

  14. Cut twine down to length required for all tags

  15. Add twine to tags

The video below gives a quick how to video.

double gold.jpg

Grouping tasks together saves time and enables a bit of choice as they do not need to be exactly the same. I have a few more tags to make and I need to find some suitable paper. I also use brown paper, I am pondering crumb cake tags, what colour tags will you be making?

post-signature.png

How I use Large Ink Pads

df.jpg

Are you new to Stampin’ Up! ink pads, or would you like to find out other ways to use your large ink pads. Over the years that I have been creating cards and items, I've fallen in love with the Stampin’ Up! inks and colours. If you're looking for high quality ink pads with gorgeous colour options (bonus being that they co-ordinate with the paper, pens and embellishments), these ink pads are for you. All the cards on this page were made using different techniques and the large Stampin’ Up! ink pads. There are a number of ways that they can be used.

df birch.jpg

There are different ways you can use large ink pads. These are a few:

Stamping- using the ink pad to ink up stamps, large ink pads make it super easy to ink up large backgroun stamps.

Stamping with blocks - either with or without water (look out for a future video on ways to use blocks for stamping.

Stamping with other items - geli plates or other items such as Stampin’ Marker lids or the end of pencils.

Creating you own embossing colours - using Versa mark and the ink pad with embossing powder to create you own coloured embossing (stamp in the Versa Mark first then add the ink, this prevents adding colour to the Versa mark pad.)

Adding colour- their are a number of ways to add colour to your cards, using Wink of Stella, Water Pens or blender pens.

The video below shows the different ways I use the ink pads and the cards I have made.

Look out over the next few weeks for more in-depth videos on how to use your ink pads. I am super excited about sharing different ways to stamp with blocks, it is one of my favourite techniques, what is yours?

post-signature.png

How I prepare my co-ordinating dies

dies 1 handpenned.jpg

Although in my last post I stated that I prefer clean and simple cards, to overly complicated ones, I adore punches. But I must confess that I have a number of dies. I mainly use layering dies, however, I have a number of stamp sets that have co-ordinating dies. I feel I don’t use them enough, so have challenged myself to use them more. To inspire myself and check they are all present and working, I complete a number of actions.

dies 4 handpenned.jpg
dies 3 handpenned.jpg

I first check that all the dies are present and correct and that they are the dies I am expecting ( I am not aware that a different die set has appeared in an envelope but it is good to check). I then take a picture, some people scan or photocopy the dies to show their position or alternatively they draw round the dies to show where they go.

I then carefully remove the dies, from the backing sheet as the double sided tape used is very sticky. I usually add a piece of magnetic sheeting to the card to add the dies to. The magnetic sheet I used in the video below came from Pink Frog Crafts. I then count to ensure that I still have all the dies (some little dies can disappear, I have a magnetic wand to find the pesky things.)

I had already stamped the Hand-Penned Petals stamps in Basic Gray, I then use my die cutting machine to die cut the items, I used my Mini Stampin’ Cut and Emboss, which I call Dinky. I cut each die cut for the co-ordinating stamps and then each die in Basic Black. For layering dies, I use Basic Black for the base and then Basic Gray for the layers. I add all the die cuts to pieces of Basic white.

I love having the inspiration for card sketches in a format that I can take it with me. The inspiration could be kept in a stamp case or a notebook.

post-signature.png

How I Prepare my Cling Stamps

Last week I shared how I prepare my photopolymer stamps. Today I am sharing how I prepare my cling stamp sets.

For the longest time I avoided cling stamps as I struggled with placement and also stickiness. However, Stampin’ Up! have developed a cling adhesive backing which is super super sticky and with more practice and stamping I have gotten better with stamping. Of course I still make errors but I am getting better.

Before stamping my cling stamps, I check all the stamps are there, that the stamps are the correct stamp set in the correct language. If it is a two part cling set I check that I have each part. After I have checked that the stamp sets are correct, I check the stamps outline. Stampin’ Up! stamps are cut on machines ( i think) and if they are lined up incorrectly there can be insufficent space around the stamp and therefore can affect how the image is stamped (this has only happened to me once with the Panda’s from Sale-a-bration a few years ago.

After my checks I add the cling stickers to the back of my stamps, it is easiest to add the cling if yoiu remove the backing one by one. You need to line up the stickers, as they can not be removed once they are stuck on the back. If you try to remove them they can remove the foam from the stamp which can affect the way it stamps.

I then stamp out the stamps on scrap paper to check how they stamp and to ensure that all the residue from the production process is removed. The video below shows the process that I use. It depends on the stamp set whether I use the Stamparatus or just using blocks.

I also create masks when I stamped the stamps, I use some gorgeous masking paper by Inkadinkado, which I cut out with scissors. Do you create masks for your stamps?

post-signature.png